ForensicPC - Lowest prices on Tableau Computer Forensic Hardware, write blockers, and forensic disk duplicators

Products

Categories » Miscellaneous Items » Cables and Adapters
« Previous \| 1 \| 2 \| 3 \| 4 \| Next »
	Firewire 400 Cable 1M	Details
	1m Firewire 400 Cable. 6-pin male to 6-pin male. Data transfer speeds up to 400Mbps. Molded strain relief. IEEE 1394 compliant.
	List Price: ~~$13.95~~ Price: $11.95

	Firewire 400 Cable 2M	Details
	2m Firewire 400 Cable. 6-pin male to 6-pin male. Data transfer speeds up to 400Mbps. Molded strain relief. IEEE 1394 compliant.
	Price: $19.95

	Laptop to IDE Hard Drive Adapter	Details
	With the Laptop Hard Drive Adapter you can easily connect your 2.5in notebook IDE hard drive to a 40-pin IDE cable for installation in a desktop or tower PC. Each adapter features 44-pin female to 40-pin male connectors, and a power feed.
	Price: $8.99

	Logicube Serial ATA Adapter	Details
	The Logicube Serial ATA (SATA) is a new standard interface for IDE hard disk drives. Instead of the traditional 40 pin connectors and ribbon cables, the new serial ATA drives utilize a thin round cable and a very small connector. The Logicube SATA Adapter is connected to the Serial ATA drive which then provides traditional parallel cable connection. Users can mix serial and parallel drives in the same session but some speed variations will occur.
	Price: $152.99

	PCI to FireWire IEEE 1394 800 Host Adapter 3+1 Port	Details
	The PCI to FireWire® 800 Host Adapter provides a high performance 800Mbps interface on 64-bit PCI systems for the most demanding applications. Perfect for connecting FireWire 800 hard drives and other high speed devices. The host adapter provides two external 9-pin ports, one internal 9-pin port, and one external 6-pin (FireWire 400) port.
	Price: $81.25

	SATA-IDE Bidirectional Converter	Details
	The SATA-IDE Bidirectional Converter is a selectable bi-direction converter for serial ATA and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The SATA physical, link, and transport layers are compliant to Serial ATA 1.0 CSP300 converter supports a 1.5GHz data rate.
	Price: $49.95

	SCSI-3 68F TO SCSI-3 SCA80F ADAPTER	Details
	The SCA (Single Connector Attachment) interface combines the Data, Power, and SCSI ID connectors into a single 80-pin connector. For these SCA drives to be used in a standard system or subsystem enclosure requires an adapter to convert the 80-pin connector back into separate Data, Power, and SCSI ID connectors. The SCSI-3 to SCSI-3 adapter is designed to adapt an existing 68-pin ribbon cable to a SCSI-3 SCA80-pin connection. The SCA80 adapter includes an onboard power connection and termination/id jumpers. Connectors: Internal SCSI-3 68-pin Female to Internal SCSI-3 HP 80-pin Female Use: Convert a 68-pin ribbon cable connection to a SCSI-3 SCA80-pin connection
	Price: $39.99

	SCSI-3 MD68F TO SCSI-1 IDC50F HIGH-LINE ADAPTER	Details
	With the internal SCSI-3 to SCSI-1 adapter, easily adapt an internal SCSI-3 68-pin ribbon connection to a SCSI-1 IDC 50-pin female connection. This adapter provides high-byte termination which is required for this type of connection. Connectors: Intenal SCSI-3 68-pin female to Internal SCSI-I IDC 50-pin Female Use: Converts a SCSI-3 68-pin male ribbon connection to a SCSI-1 IDC 50-pin female connection Provides high-byte termination which is required for this type of connection
	Price: $33.99

« Previous \| 1 \| 2 \| 3 \| 4 \| Next »